General Pump PMREP1313G8 Made Ready Pump Kit, EP1313G8 with EZ Start Unloader, 4000 PSI, 4.0 GPM, 1" Shaft Gas

The General Pump PMREP1313G8 is a made ready pump kit built around the EP1313G8 triplex plunger pump, so you get the pump and plumbing together. It delivers 4.0 GPM at up to 4,000 PSI on 9 to 13 HP gas engines with a 1" shaft and includes a PULSAR4KHPEZ EZ start unloader, thermal relief valve, garden hose inlet fitting, QC socket and plug, hose barb and mounting bolts.

Key Features

• General EP1313G8 Pump with SAE J609 Gas Flange
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• New Forged brass manifold , increases working pressure to 4,000 PSI
• Solid ceramic plungers with dual guide system

What's Included

• General EP1313G8 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket and 3/8” QC Plug Included
• Mounting bolts

Specifications

Note: Pumps are not tested prior to shipping and unloader will need to be adjusted

Frequently Asked Questions

What is included in the made ready kit?

EP1313G8 pump, PULSAR4KHPEZ EZ start unloader (4,050 PSI, 10 GPM), thermal relief valve, 3/8" hose barb and clamp, 3/4" garden hose inlet fitting with 1/4" side port, 3/8" QC brass socket and plug, and mounting bolts.

Is the unloader pre-set?

No. Pumps are not tested before shipping, so the unloader must be adjusted at installation.

What engines does it fit?

Gas engines from 9 to 13 HP with a 1" shaft and SAE J609 flange.

What horsepower is required?

14.5 GHP.

Max water temperature?

165°F.