General Pump PMREP1508G8 Made Ready Pump Kit, EP1508G8 with EZ Start Unloader, 3045 PSI, 3.4 GPM, 1" Shaft Gas

The General Pump PMREP1508G8 is a made ready kit with the EP1508G8 triplex plunger pump, PULSAR4KHPEZ EZ start unloader, thermal relief valve, safety relief valve and fittings. It delivers 3.4 GPM at up to 3,045 PSI on 9 to 13 HP gasoline engines with a 1" shaft.

Key Features

• General EP1508G8 Pump with SAE J609 Gas Flange
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• New Forged brass manifold , increases working pressure to 4,000 PSI
• Solid ceramic plungers with dual guide system

What's Included

• General EP1508G8 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• Safety relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket and 3/8” QC Plug Included
• Mounting bolts

Specifications

Note: Pumps are not tested prior to shipping and unloader will need to be adjusted

Frequently Asked Questions

What is included?

EP1508G8 pump, PULSAR4KHPEZ EZ start unloader, thermal relief valve, safety relief valve, 3/8" hose barb and clamp, 3/4" garden hose inlet with 1/4" side port, 3/8" QC socket and plug, and mounting bolts.

What horsepower is required?

10.6 GHP.

What engines does it fit?

Gas engines from 9 to 13 HP with a 1" shaft and SAE J609 flange.

Does it need adjustment?

Yes. The unloader needs to be adjusted at installation.

Max water temperature?

165°F.