General Pump PMRET1506G6 Made Ready Pump Kit, ET1506G6 with EZ Start Unloader, 2610 PSI, 2.9 GPM, 3/4" Shaft Gas

The General Pump PMRET1506G6 is a made ready kit with the ET1506G6 triplex plunger pump for 5 to 7 HP gasoline engines with a 3/4" shaft. It delivers 2.9 GPM at up to 2,610 PSI and includes a PULSAR4KHPEZ EZ start unloader, thermal relief valve, safety relief valve, inlet fitting, QC socket and plug, and mounting bolts.

Key Features

• General ET1506G6 Pump with SAE J609A Gas Flange
• Direct Drive with Gas Flange 5.0-7.0 HP SAE
• New “HR” anti-corrosion surface treatment on manifold
• Solid ceramic plungers

What's Included

• General ET1506G6 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• Safety relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket and 3/8” QC Plug Included
• Mounting bolts

Specifications

Note: Pumps are not tested prior to shipping and unloader will need to be adjusted

Frequently Asked Questions

What engines does it fit?

Gas engines from 5 to 7 HP with a 3/4" shaft and SAE J609A flange.

What horsepower is required?

6.9 GHP.

What is included?

ET1506G6 pump, PULSAR4KHPEZ EZ start unloader, thermal relief valve, safety relief valve, hose barb and clamp, garden hose inlet fitting, QC socket and plug, and mounting bolts.

Is the unloader adjusted?

No. It needs to be adjusted at installation.

What manifold does it have?

An HR anti-corrosion treated manifold with solid ceramic plungers.